Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
1,000-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Features:
Specs:
A heavy front load can cause front-end sag as your factory suspension compresses under the weight of the load. This means that the front axle is trying to support not only the extra load but also the weight of your vehicle. And because there is less weight on your rear axle, your rear tires make less contact with the road, which causes problems with traction, steering, and braking. SumoSprings upgrade your vehicle's factory suspension to level your vehicle, improve driving performance, and keep your ride comfortable.
SumoSprings provide progressive load control - the more you load them, the stiffer they become. With a lighter load, the springs will compress easily for soft engagement and a less bumpy ride. The closed-cell urethane material allows for smooth contact between the springs and your vehicle. And the springs act like a shock absorber to dampen road vibration.
The springs can also compress by as much as 80 percent to support a heavy front load and to help your factory suspension bear up under the load. This evens out the weight, which levels your vehicle and ensures that your rear tires are making better contact with the road. A level ride means that you have improved driving control, ensures safe headlight aim, and helps to minimize sway. The springs also support your factory suspension, which helps prevent sagging and reduces bottoming out.
The springs work independently from one another to support each side of your vehicle. This action helps to reduce body roll when you make a sharp turn. This also helps compensate for an off-center load.
These microcellular urethane springs are tough. They resist abrasion, oil, salt, and UV rays that can more quickly wear out other springs, and they perform well in temperatures ranging from -25 F to 200 F (-33 C to 93 C).
SumoSprings compress vertically with minimum expansion to the sides, so they won't be damaged by nearby mechanical parts and they fit safely into tighter spots. And unlike air springs, SumoSprings require no maintenance or adjustment.
The helper springs are custom designed to fit your vehicle, and they install easily - no drilling required.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello neighbors, Steve here with etrailer.com. Today we're looking at the SumoSprings Solo Custom Helper Springs for your front axle. Now folks, these are a custom fit application. Make sure you're using our fit guide on etrailer.com. Top center of the homepage. Enter your year, make and model.
Make sure you're getting the right parts the first time. This particular set here is gonna fit a 2007 through 2009 Freightliner FRED Chassis. That's right, FRED Chassis, as you know, is an acronym for Front Engine Diesel. So that's the chassis that's we're looking at, and these are a nice set of helper springs to upgrade your vehicle's front suspension. And they're gonna give you an improved driver control and comfort.
Now they will support heavy front end loads, keep that vehicle level, also help absorb bumps, shocks, minimize sway. They do have what's called progressive low control so the springs can compress, according to the weight of your cargo. Obviously, I'm not heavy enough to make these compress, but I went ahead and threw a graphic up here. Keep in mind the color of the rubber can change, depending on the temperature that they molded at, et cetera, et cetera, supplies. And obviously the one in this photo here locally is a different shade of blue than what you're looking at on my table.
But that's how they compress. And as I said, they have the progressive load control. That way when you have a heavier load, they're gonna do more. If you have less, they have less. So very simple install, you'll simply install these through the frame.
And they have the included hardware here, all the instructions, included with it. It's a very simple, quick install. You should be removing the old jounce stoppers and putting these right back in the place of the old ones. Now a nice thing about these is they do compress or can compress as much as 80% to give you support that you need. And on the lighter loads, the spring's gonna compress easy at first, but then it'll get stiffer, the more weight it has on there and that kind of thing. So again, that's that progressiveness I was talking about. And they also work independently from one another. So let's say you had a front end for whatever reason on one side a little heavier than the other, one side could compress a little more, but help even out everything. Now these do also help reduce body roll whenever you're doing those sharp turns. They are made of a durable microcellular urethane. They do work at all temperatures, ranging from negative 25 Fahrenheit all the way up to 200 degrees Fahrenheit. And the material, again, does reduce or resist damage, oil, road salt, UV rays, none of that's gonna hurt this stuff. They have very minimal lateral expansion, so meaning the springs compress vertically instead of side to side. Now again, they are maintenance free. You don't have to run tubing like you do on air compressors and those kind of kits, anything like that. Again, no drill install whatsoever. They're made in the USA and they have a rating of 1000 pounds at 50% compression. Folks, they do offer a nice limited lifetime warranty as well from SumoSprings. So I think you'll be happy with these. Again, '07 to '09 Freightliner FRED Chassis. I'm Steven, thanks for watching and have a great day.
Average Customer Rating: 4.7 out of 5 stars (2281 Customer Reviews)
1,000-lb Capacity. Upgrade your vehicle's front suspension with these maintenance-free helper springs. Sturdy microcellular urethane springs cushion bumps and help support a heavy load to level your ride and minimize sway. No-drill installation.
Seems to be doing the job. Haven’t put many miles on yet ! The motorhome would bottom out against the original rubber stop when it hit a pothole. Now with the new stoppers . It doesn’t hit so hard!
Quick delivery.
Easy installation.
Dramatic ride and handling improvement.
Completely satisfied with the springs !! Much smoother ride and no jarring when we do hit a bad spot in road ! GREAT PRODUCT !!!
I believe it’s going to be a great addition to my truck when pulling our RV. Looking forward to a smoother, more even ride. I left the 2x4 blocks in overnig8ht and drove around to ensure a good seat for the springs.
Very easy installation in about 20 minutes. Very ingenious concept as opposed to bolt on leaf style helper springs
I installed Sumo Springs on our 06 Xterra right after we bought our Casita 17' trailer. The back of the X squatted a bit more than I liked. I had also noticed before some tendency to bottom out if the car was full of people and stuff. These ingenious devices are a perfect solution for me! They are about 3/4" clear of being engaged with the axle when unloaded, so the ride is not overly affected, but progressively take up some of the weight when the back end starts coming down with load. It now sits very nicely with the trailer connected, no weight distributing hitch and stuff in the back, and no more bottoming. We've put a good number of miles on the X in the last year, towing and not towing, and they are still doing the job.
I should note, the back of my Xterra is lifted about an inch with AAL springs. If that were not the case, the Sumo Springs would be engaged all the time. That will vary with vehicle.
I will also note that they are non-adjustable, unlike airbags. I kinda like that, I didn't want to mess with adjusting air pressure and such. But once they do start kicking in as one or both wheels travel, they do stiffen it up quite a bit. I mean, there's no way around that; you can't take load without stiffening the suspension. As such I think they inhibit upward axle articulation a bit when 4-wheeling, but for us that's not a big deal. Since they do not connect to the axle, they don't affect downward articulation at all.
The pics are shortly after installation, one with the car unloaded, and two with trailer and gear loaded up.
I originally purchased the yellow sumo for additional support when hauling a small trailer or taking trash to the dump so I wouldn’t strain the vehicles suspension that I just replaced . I also never like to see a truck squat . Yellows were too stiff when unloaded so I got these blues sumo and it was a great decision . The ride type is back to original “comfortable” and the sumo still provides great handling when cornering reducing body sway / shock absorbing bumps. A good investment !
These Sumo Springs were easy to install, even for a 70 year old guy. I tow a 7,000lb camper and even tho I have a nice WDH I still had som sag on my Tundra. These helped level it out when towing and got rid of “some” of the bounce. They were really a godsend when I overloaded the bed with about 2,000lbs of pavers. That weight squished the Sumos significantly but the truck drove and rode great. Better and less expensive than air bags.
Gave it 5 because of ease of install - note they use SAE threads 9/16, truck frame and oem is metric 15mm wrench. Makes no difference but don't use oem nuts on spring. I installed all shims supplied and this left about 3/4" gap so hoing its the best for my needs. Easy to reduce if needed.
The SumoSprings Solo came to the RV Resort today. I installed them on my Titan SV today in less than an hour. Only drove 10 miles with them and they are what I was looking for. In my opinion it was a needed upgrade and thumbs up!
While these worked great for the first few months and helped level the load, they have now become deformed and squished out of shape permanently. We have a slide in camper that is on the truck for only for trips otherwise the truck is unloaded and off the bumps. I did not expect them to deform so much, and so easily after only a year of use.
I have had these on my Jeep Gladiator for over a year now and I still like them. Sumo Springs really help with sag when towing my Scamp camper trailer and when the truck bed is loaded with stuff. When it is cold outside they are stiffer and I can feel when they hit the stops on hard bumps. Sumo Springs are a very easy overload spring option with factory lift.
Great upgrade from the oem jounce. Easy to install with 2 people but follow the install video and use a 1/2" deep socket with a long extension. Took about 30 minutes.
Fairly simple to put on but need to work around the brake lines and bed cross beams. I haven’t tried it yet with weight. I have enclose pic of drivers side. Maybe can’t tell from the pic but there is space and flexibility around the lines around bolt.
Straight forward, simple, replacement for OEM springs. These springs make contact with the lower arms all the time and definitely help dampen the bounce effect from a heavier steel bumper. Any rolling effect from uneven roadways and turning is also reduced, it feels the vehicle is more stable. For my situation, this is the first step to take before considering replacing shocks, etc., and is very economical. I'll give it more time, but I believe this is all I'll need to do. Thanks etrailer! Quick shipping!
They worked pretty good. They kept my vehicle from bottoming out when towing my 5th wheel camper. They also helped to avoid bucking and chucking upon acceleration. In addition to these though I also purchased RAC rear suspension enhancement springs but having towed with them yet. Hoping for some improvement in general handling.
Hello, i installed the Sumo springs on my 2020 M/B 2500 pleasure Way camper van 19.5 foot, if you do not want to go in for the full suspension upgrades for 5 to 6 thousand dollars the Sumo spring is a
decent up grade to help with sway, we aren’t off roaders campers
but they work nice in unimproved campsite. I have about 4500 miles on my camper since I installed them which took about a hour. It did raise the camper by about 1/4”.
I just used a floor jack and big flat screw driver for the back and deep well socket for the front ones. Sorry I didn’t take a video or picture. But so far I would recommend the sumo springs it is better then stock bump blocks.
And thanks to etrailer for getting me the right setup
for my camper.
The Supersprings smoothed out the camper trailer ride especially noticeable on bumpy roads. A good product that does what it’s supposed to do. If I ever get another camper I’ll get Supersprings again.
Very impressed. Stopped the Tacoma lean. Also helped with the trailer. I do use a distribution hitch I bought from etrailer. Just bought the sumo spring for other applications. Those little bitty factory bumps where junk. These help with lean, and off road hard bounce.They are great.
So glad I found these! Best upgrade for my Winnebago Era Touring Van. Simple to install. I only needed a floor jack to get it done. Van doesnt ride like a boat in a storm anymore. Highly recommend for Sprinter vans.
First off, these won't fix worn out suspension components, they are designed to improve ride quality by reducing sag/porpoising, especially on heavier vehicles.
Our 2010 Roadtrek 210P (75k miles) is a great rv but essentially a big heavy tub going down the road. Has the tendency to lean and wallow front to back. New shocks and all suspension is good, as mentioned make sure that stuff is all in good shape.
Pics show the oem stops vs the SS stops. Big difference - you may assume ride gets harsh but not the case. The oem stops were very tired and didn't do much. The preload on the new SS stops is just about perfect - any weight changes are very progressive which takes the harshness out of the ride. I didn't really see any change to ride height either.
Road manners are improved, there's a bit more resistance to lean, but the main difference is that the front end doesn't try to change height as readily with the back end.
Not a big deal to install. Youbdont need to pull the wheels, just turn them side to side to get to the stops. Pop out the old stops and clean the retaining cups with a wire brush and some brake clean. I used syl-glyde on the new stops to help get them into place. I also used a crowbar under the stop to push it into the cup while making sure the 4 tabs captured the top of the stop. Final step was to lower the van and give it a drive, then check to ensure the fit was good. The key here is to clean the cup first and use a bit of lube on the new stop.
Very pleased and I'll be installing SS on the back end soon. Yup, they're pricey but they are good quality with a limited lifetime warranty.
These springs are amazing! They helped tremendously pulling my landscape trailer with all my mowers. I picked up a tractor impliment that I would normally bring a trailer for, but decided to put these springs to the test. Couldn't believe how good my truck rode and handled with 780lbs at the rear of my bed! These springs have exceeded all expectations.
I will say that I initially put the spacer, but found it effected my ride to much so I pulled it. Afterwards it rides like stock.
We pull an off-road teardrop camper with our 2013 Toyota Tacoma and were looking for a little help with the rear end sag when we have that hitched plus putting some weight in the back of the truck (firewood, water, etc). Our Tacoma is lifted (2.5") but the lift kept the stock springs with an added Deaver leaf to help with the notoriously soft Toyota springs. However, with the shell and ~300 pounds of weight in the back, it still sagged, especially with another 250 lbs of tongue weight from the trailer. The Sumos have eliminated that sag, even with bigger loads in the bed, eliminated body roll (also notoriously bad with Tacomas) and didn't destroy the ride for day to day driving. There might be a slight bit more stiffness when hitting speed bumps, but definitely not bad at all. If anything, I would say it IMPROVED the ride and handling.
The springs themselves were simple to install, less than half an hour start to finish. Some reviews have said they were bumping the frame after installing but we had about 1/2" gap on both sides. The only "specialty" tool would be a torque wrench capable of 90 lbs to get it to spec.
We considered Firestone air bags but after talking with the reps at e-trailer, we decided on these and couldn't be happier. Reasonably priced (half the price of air bags), no maintenance, great customer service...can't argue with anything at all.
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.